An interceptor gives grease and food solids a place to separate from wastewater before it leaves the kitchen. Over time, material can collect around the outlet and make the tank harder to check. Slow drains or standing water in the sink can mean the interceptor needs attention, although a blocked line is another possible cause. Cleaning can also make internal parts easier to see after pumping. Call to describe the problem to a provider who works nearby.
Call (424) 500-5710 to reach a provider →
How interceptors differ from indoor traps
Indoor grease traps are often located near kitchen fixtures, where they capture grease before wastewater enters the drain line. An interceptor serves the same basic purpose but is usually installed below ground outside the building.
Interceptors are sized by capacity, commonly from about 500 to several thousand gallons. Their location and capacity affect how the tank is accessed and cleaned. If you are unsure which equipment your kitchen has, check your service records or building plans.
What thorough cleaning includes
- Pumping out grease, wastewater and settled food solids from the interceptor.
- Removing residue from tank walls and accessible internal surfaces after pumping.
- Jetting away stubborn buildup where needed and appropriate for the equipment.
- Clearing and checking inlet and outlet tees for buildup or damage.
- Cleaning around baffles so their condition and flow paths can be checked.
- Checking the sample box, if present, and clearing accumulated material as needed.
Ask the provider which steps are included and request paperwork showing the work performed and any issues found.
Confined space considerations
An interceptor can contain hazardous gases and may have too little oxygen to breathe safely. Opening a lid does not make the space safe to enter, and conditions inside can change.
Cleaning is generally done from above using hoses and other equipment, without entering the tank. If a task appears to require entry, ask the provider how it will be handled. Kitchen staff should stay out of the interceptor.
Inspecting tees, baffles and lids
Inlet and outlet tees guide wastewater through the interceptor. Baffles help separate grease and solids from the water that moves toward the outlet.
Once buildup is removed, these parts are easier to check for cracks, missing sections or other damage. A damaged outlet tee can allow grease to move farther down the line.
Lids also need attention. Check that they fit securely and note visible damage. Ask for any concerns about tees, baffles or lids to be included in the paperwork.
How buildup affects inspections
Heavy grease and solids can obscure the outlet tee and baffles, making their condition harder to assess. Buildup in a sample box can also make it harder to observe wastewater there.
Your city or sewer district sets local requirements for interceptor care and records. Keep service records showing the work performed, along with notes about damage or repairs. Before an inspection, check that paperwork and address any outstanding concerns.
What affects the price of interceptor cleaning
Tank capacity and the amount of accumulated grease and solids can affect the work involved. Access matters too, including where the lids are located and how close equipment can get to them. Additional cleaning around tees, baffles or a sample box may affect the scope. Jetting and repairs may be separate items, so ask the provider what is included and how any additional work would be handled.
Grease interceptor cleaning questions
Is interceptor cleaning different from interceptor pumping?
Pumping removes the contents of the tank. Cleaning also addresses residue left on accessible surfaces and around internal parts. Ask whether the work includes the tees, baffles and sample box, if there is one.
How do I find my interceptor?
Check building plans and past cleaning paperwork for its location. An interceptor is usually below ground outside the building, with access lids at the surface. Avoid opening a lid yourself if you are unsure how to do so safely.
What if parts inside are broken?
Ask the provider to identify the damaged part and note its condition in the paperwork. A broken tee or baffle may need repair or replacement. Discuss the recommended work and what it includes before proceeding.
Can cleaning happen while the kitchen is open?
That depends on the interceptor's location, access and how wastewater will be managed during the work. Discuss your kitchen hours and expected drain use with the provider so you can plan around service.